- Center Distances from 1.33” through 10”.
- 14 sizes available with ratings to 104 HP.
- Available in single, double and triple reductions.
- Ratings from 5:1 to 216,000:1. Helical worm ratings from 25:1 to 600:1.
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.
- Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized steel output shaft provides superior overhung load and torque characteristics.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
- Available pre-assembled with LEESON or Lincoln Motors for the perfect GEAR+MOTORTM package.
- T Base Worm Over
- U Base Worm Under
- J Mount – Vertical Input Base
- F Flange
- VL & VH Vertical Output Base
- Hollow Shaft Tie Rod Kit
- Torque Arm Bracket
- R Riser Block
- Center distances from 1.33” through 6.00” available.
- Eleven sizes available to 35 HP.
- Available in single, double and triple reduction.
- Ratios from 5:1 to 216,000:1.
- Aluminum housing provides superior resistances to corrosion, even in harsh environments.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant – USDA Class H1 approved.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.
- Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized steel output shaft provides superior overhung load and torque characteristics.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
- Available pre-assembled with LEESON or Lincoln Motors for the perfect GEAR+MOTOR™ package.
- T Base Worm Over
- U Base Worm Under
- J Mount – Vertical Input Base
- F Flange
- VL & VH Vertical Output Base
- Hollow Shaft Tie Rod Kit
- Torque Arm Bracket
- R Riser Block
- Center distances from 1.33” through 3.250”.
- Six sizes available with ratings to 17 HP.
- Available in single and double reduction.
- Ratios from 5:1 to 3600:1.
- 316 stainless steel housing and covers to withstand extreme environments.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant – USDA Class H1 approved.
- Vent-free “sealed-for-life” design with Enviroseal technology.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-ring on face of input flange provides a positive seal against moisture intrusion.
- 303 stainless steel output shaft.
- Worms are cut, heat-treated, ground and polished to provide efficient, quiet operation.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers.
- Available pre-assembled with LEESON or Lincoln Motors for the perfect GEAR+MOTORTM package.
- T Base Worm Over
- U Base Worm Under
- F Flange
Cast Iron (GR Series)
Product Description
The 800 Series Grove Gear IRONMAN™ reducer line is a true heavy duty workhorse that handles the environmental assaults, shock loading, frequent reversing and continuous duty cycles typical in many industrial applications. Designed to be the premium worm reducer in the industry, IRONMAN TM reducers offer top quality features.
Specification
Standard Features
Accessories
Aluminum (EL Series)
Product Description
Electra-Gear offers a unique, aluminum gear reducer line, which is the most extensive of its kind in North America. Electra-Gear’s aluminum products are a light weight, yet durable alternative to today's cast iron and stainless steel models, and are available off-the-shelf or customized to your exact specifications. The design provides features in a robust, aluminum, single-piece housing.
Specification
Standard Features
Accessories
Stainless Steel (SS Series)
Product Description
Grove Gear Stainless Steel gear reducers offer superior corrosion protection. They are rust proof and able to withstand the harshest conditions. The stainless steel housing, cover and external hardware offer an exceptionally long life.
